INVERTED METALLURGICAL · BRIGHT/DARK-FIELD

STME700

Research-Grade Inverted Bright/Dark-Field Metallurgical Microscope

STME700 adds full bright/dark-field switching to the STME500 platform — the research answer for large workpieces whose defects hide in scattered light. Flat-field BD apochromats from 50× to 1000×, per-objective light memory, coded turret and an LCD control panel make advanced contrast as simple as turning a knob.

SHANGTONG STME700 research-grade inverted bright/dark-field metallurgical microscope

Key Features

Bright/Dark-Field Switching

A dedicated BD unit in the stand switches contrast modes instantly — inclusions, coatings and fine scratches surface in dark field.

LCD Light & Magnification Display

Light intensity and engaged objective shown on the stand panel — repeatable settings across operators and shifts.

Light-Intensity Memory

Brightness memorized per objective; magnification changes restore the stored intensity automatically.

Coded Nosepiece Sync

5-position BD turret with DIC slot keeps software calibration aligned with every objective change.

Flat-Field BD Objectives

Apochromat correction 5×–100× with long working distances, sharp to the field edge.

Polarizing Ready

Polarizer slot on the stand for stress and anisotropy checks without extra hardware.

Specifications

Model STME700
Optical system Infinity color-corrected optical system, 45 mm
Observation head Infinite hinged trinocular head, interpupillary 50–75 mm, single-side diopter ±5, two-position split R:T = 100:0 or 0:100
Eyepieces High-eyepoint widefield flat-field CFI 10X/22 mm (focusable)
Objectives Bright/dark-field flat-field apochromat: 5× NA0.15 WD14.8 · 10× NA0.30 WD8.5 · 20× NA0.40 WD11.9 · 50× NA0.75 WD4 · 100× NA0.90 WD1
Stand With bright/dark-field switching unit and polarizer slot; LCD panel shows light intensity and objective magnification
Nosepiece Coded 5-position bright/dark-field turret with DIC slot — calibration follows the objective automatically in the software
Focusing Low-position coaxial coarse/fine, 9 mm coarse travel (6.5 mm up / 2.5 mm down), 0.002 mm fine division, tension adjustment
Stage Double-layer mechanical stage, low-position coaxial X-Y controls, transmitted-reflection glass stage plate
Camera port 0.7× C-mount adapter, focusable
Accessories 4K and USB3.0 PC imaging systems; cameras from 5 MP to 20 MP; precision micrometer 0.01 mm; measurement, metallographic analysis, grain and porosity analysis software suites

Application Gallery

STME700 — front view with LCD control panel
STME700 — front view with LCD control panel
STME700 — rear view showing the large stage opening
STME700 — rear view showing the large stage opening
LM Plan APO DIC BD objective range
LM Plan APO DIC BD objective range

Applications

Heat-Treat Verification

Dark field exposes grinding burns, micro-cracks and coating edges that vanish in bright field.

Large Castings & Forgings

Full research-grade contrast on workpieces that never fit an upright microscope.

Failure Analysis

Combine BF, DF and polarizing contrast to trace crack origins and coating failures.

Request a Quote

Tell us your inspection challenge — we will configure the right STME700 and demonstrate dark-field contrast on your own parts.

Contact Us